If your outfitter tent weighs more than 150 lbs there is not free shipping as 150 lbs is maximum weight limit for UPS or FEDEX. Shipping will be by truck paid by the customer.

                                              STANDARD CHARACTERISTICS WITH EVERY MONTANA OUTFITTER TENT.

HEAVY PARAFFIN FIRE, WATER, MILDEW TREATMENT that will make the tent very water, mildew and fire resistant. The paraffin treatment is very similar to canvas used in the military.

STOVE JACK with a weather flap in your choice of 4", 5", or 6" opening. Flap includes velcro and buckles. Stove jack is on left side in the roof as you enter the tent. Center of stove jack is 32" from left end wall and 24" from left side wall.

EXTRA LAYER OF CANVAS ON RIDGE and additional reinforcement at the gable ends.

TENT BAG ROPES & TENSIONERS

SOD CLOTH sewn onto the outfitter tents bottom extends a generous 12" beyond the tent floor to provide a weather-tight seal. 

ZIPPER DOOR, STORM FLAP WITH BUCKLES. Heavy duty trouble-free YKK zipper with weather flap that is secured by Fastex side release buckles. 

REINFORCED EAVES. Tent has 18 oz. truck vinyl with 1/4" rope sewn between two layers of canvas doubled stitched. This reinforcement is to ensure extra strength at all grommet locations.

SIX LAYERS OF CANVAS on end wall seams -double lock stitched.

REINFORCED WEBBING at the bottom of each outfitter tent is reinforced with webbing and utilizes grommets instead of sewn-in stake loops to allow you to stake your tent from the inside or outside.

WEBBING AT TOP OF DOOR for reinforcement.

A DVD is provided that shows you how to set up and care for your outfitter tent.

PORCH option is 10' long and has 1' overlap with tent. Only 9' of useable porch space.  

BACK  WALL WINDOW.  Top of window is a few inches above side wall eaves.

RAFTERS FOR EACH TENT SIZE IF YOU ORDER AN IDAHO STEEL CONDUIT FRAME. SHIPPING REQUIRED.

8 x 10: 3 RAFTERS

10 x12: 3 RAFTERS

10 x 14: 4 RAFTERS

12 x 14: 4 RAFTERS

12 x17: 4 RAFTERS

14 x 17: 4 RAFTERS

14 x 20: 5 RAFTERS

16 x 20: 5 RAFTERS

16 x 23: 6 RAFTERS

18 x 23: 6 RAFTERS

PRICES FOR MONTANA CANVAS OPTIONS AND ADD TO THIS ORDER PRICES ARE ONLY VALID WHEN ORDERED WITH AN OUTFITTER TENTS.

Items shipped to an IDAHO address must pay Idaho sales tax.
If you want a back screen door, click only on the back screen door option above. Do not click the back door option as you will have an additional charge. 

                                                                                                                   CUSTOM TENT ORDERS

The Montana Canvas Outfitter Tents can be ordered with many different options. 

CALL TO ORDER  CUSTOM ITEMS LISTED BELOW WITH PRICE INDICATED as some of these items cannot be ordered on line.

• Custom Window size (screen or plastic) - Call
• Screen Window-24" tall x 30" wide $70.
• Screen Window  30" tall x 48" wide  $100
• Screen Door
• Zippered Door
• Tie Door - No additional charge. Call
• Wood Door Opening cut in canvas
• Zippered Corners to roll up side wall, $90 per side.
• Screen Sidewalls. $17 per linear foot.
• Custom Porch with Screen Sidewalls, $260 plus cost of porch.
• Custom Porch with canvas side walls that roll up with screen sidewalls, $440.
• Oversized Treated Porch.  Call 
• 2 Eave Flaps
• 6' Walls
• Additional stove jack   $90   
• Electrical Outlet opening in wall $50
• Cut out for air conditioning $50

 MONTANA CANVAS ALUMINUM FRAMES - LISTED BELOW UNDER ADD TO THIS ORDER 

MONTANA CANVAS SIDEWALL SEAMS: All 10 oz. canvas tents have 5' seams, 12 oz. canvas tents have 4' seams and blend tents only have seams at the edges/corners.

                                                                                                         GENERAL INFORMATION

REAR WINDOW: Rear tent window, if ordered, will be slightly off center to the left, looking at the window from inside the outfitters tent. Window off center to the left is to avoid the seam. Bottom of window is 4' 6" from bottom of tent.

RAIN FLY: Stove jack area is zippered and reinforced with webbing. Relite material- 100% UV protection. Includes ropes, tensioners, stakes/spikes. A rain fly protects the canvas from ultra violet rays, provides another moisture barrier, keeps the canvas roof clean by preventing sap, pitch and dirt from accumulating on the roof when the tent is set up near trees. And most importantly, the fly protects the tent roof from any stove sparks that might land on the canvas which will burn pin holes in the roof.
The fly is an absolute necessity if you have a relite tent with the relite roof. Sparks from the stovepipe will quickly burn pin holes in the roof resulting in leaks.
The fly should rest on the outfitter tent ridge and have a 4-6 inch air gap between the fly and the eave. 

For non sewn in floors, a relite or vinyl stake in floor can be ordered. 

RELITE FLOORS: Relite floors are thin and there is a strong possibility of floor punctures when stepping on sharp objects such as rocks, pieces of branches, etc, that are under the outfitter tent floor area. CLICK to view additional information.

Products manufactured by Montana Canvas are warranted against defects of materials and workmanship. Any product found defective will be repaired or replaced (at the discretion of Montana Canvas) without charge when the product is returned to the retail seller with freight charges prepaid.