Menu

Copy of Frame and Angle Kit Calculator

How to Measure Your Wall Tent for a Precision Fit

Choosing the right frame or angle kit starts with accurate measurements. Proper dimensions prevent loose fabric, pressure points, and early wear. Because our frames and angle kits are custom-built to match your specific tent, precise numbers are required. Please do not round your measurements.

Measurement Best Practices

  • Lay it Flat: Spread your tent out on level ground.
  • Keep it Taut: Have a partner help you hold the canvas taut, but not over-stretched, while measuring.
  • Measure the Rear: It is often easiest to measure the back wall opposite the door to avoid interference from zippers.
  • Older Tents: If your tent is several years old, measure the wall height 5 to 10 inches above the bottom edge.
Wall Tent Measurement Diagram A B C D

The Four Primary Measurements

(A) Wall Height: Bottom edge of canvas to the seam where the wall meets the roof.
(B) Rafter / Slope: Center ridge grommet to the roof/wall seam. Do not include the eave or overhang.
(C) Width: Full span from one side wall to the other.
(D) Length: Seam to seam along the ridge.

What Information Do We Need?

Angle Kits: Require measurements B and C.
Full Internal Frames: Require A, B, C, and D.
Lightweight Aluminum Frames: Require A, B, C, D, and total ridge height.

Frame & Angle Finder Calculator

Input your measurements below to verify kit compatibility and generate a DIY cut list.

Shop Parts For Your Build

Get In Touch With Us

Call Us: 208-882-1791
Toll Free: 800-234-1150

Fax: 208-883-3304
support@walltentshop.com

Sign up for our newsletter below to keep in touch with our community

Proud To Serve You

Veteran Owned Federal Contractor
DUNS #:152032343

Moscow, Idaho 83843

Google Reviews Badge
79
25
Facebook Reviews Badge

© 2002 - 2025 Wall Tent Shop. All Rights Reserved.

Liquid error (layout/theme line 561): Could not find asset snippets/gpo-custom.liquid < i.value = ""; }); sEl.value = "6"; resEl.style.display = "none"; resEl.innerHTML = ""; } qs("#wtsCalcBtn", container).addEventListener("click", calc); qs("#wtsResetBtn", container).addEventListener("click", reset); qsa("input", container).forEach(function (i) { i.addEventListener("keydown", function (e) { if (e.key === "Enter") calc(); }); }); } function initWtsAngleCalculator() { buildCalculator(document.getElementById("wts-angle-calculator")); } if (document.readyState === "loading") { document.addEventListener("DOMContentLoaded", initWtsAngleCalculator); } else { initWtsAngleCalculator(); } })();