canvas tents
  • FREE SHIPPING
  • 4.8 GOOGLE RATING
  • NO SALES TAX
  • SHIPS 1-2 DAYS AFTER ORDERING
  • BEST PRICES ON INTERNET
FREE SHIPPING

TENT FRAME ANGLE KITS DO NOT INCLUDE FRAME POLES.

MONTANA ANGLES DIFFER BETWEEN MONTANA TENT SIZES.
The majority of older 8 x 1 0, 10 x 12, 12 x 14 and 14 x 17 Montana Tents take a 110 degree angle at the peak and 125 degree angles at the eaves.  This has changed with the new Montana Tents. 
If you do not know the degree of angle your tent requires, please measure your Slope (B) and Tent Width (C) so we can determine the proper degree of angle needed.  View angle kit measuring instructions.
Montana angles are 1 3/8" galvanized steel with support braces for additional strength & durability.
Purchasing angle kits and then purchasing 1” inside diameter, thin walled, electrical conduit at a local hardware store is the most economical approach to purchasing an internal frame. Internal frame shipping charges are very high due to the weight of an internal frame. Typical frame savings using an angle kit on a 12x14 internal frame is $200.
PROVIDE MONTANA TENT SIZE ABOVE.
PROVIDE  B & C TENT MEASUREMENTS IF YOU ARE NOT POSITIVE ANGLES REQUIRED ARE MONTANA ANGLES.
If your provided angle measurements are not for a Montana Tent you will be required to pay for custom angles.
Click  canvas tent angle kits for instructions on how to measure tent for B & C measurements and for info on how to make  a tent frame using angle kits..

We will calculate your degree of angles based on your tent measurements. Shipping angles to and from customer will not be reimbursed if you order the wrong angles or provide inaccurate tent measurements. 
MONTANA angle kits can ship 1-2 DAYS after ordering. All Montana angles in stock.
Typical frame savings using an angle kit on a 12x14 internal frame is $200.

Strongly recommend you read Tent Frame Information and Recommendations before you build your frame or set up your tent.  A maximum distance of 6' is recommended between rafters. More than 6' causes a sag in the roof and significantly reduces snow load carrying capacity.

YOU MIGHT ALSO WANT TO ADD TO THIS ORDER

Rubber bottom caps. Rubber bottom caps are put on the bottom of your frame legs to protect your sod cloth or floor. 

Frame bags.  Frame bags are used to store and transport your frame poles. 

10" Sleeves. Sleeves are used when the vehicle you are transporting your frame in is too short for your rafters.  Cut the rafters in half and when setting up your frame , the sleeve connects the 2 piece rafters.

Leg Supports. Primarily used to attach  tent frame legs to a platform.  Tent legs can easily fall off a platform during high winds.