208-882-1791
1-800-234-1150
FAX: 208-882-4297

support@walltentshop.com

We accept orders
7 days a week
7am - 9pm
Pacifc Time

Wall Tent Shop Accepts PayPal
We accept Paypal payments. Please call.


Wall Tent Blog

Wall Tent Shop is a
Veteran Owned
Federal Contractor
DUNS #: 152032343


Contact us by Email
support@walltentshop.com

Wall Tent Shop
3071 West Twin Road
Moscow Idaho 83843
208-882-1791
All Rights Reserved
©2002

TENT ANGLE JOINT KITS

Purchasing angle kits and then purchasing 1” inside diameter, thin walled, electrical conduit at a local hardware store is the most economical approach to purchasing an internal frame. Internal frame shipping charges are very high due to the weight of an internal frame.

I will provide assistance if you have trouble understanding angle kit instructions. Typical frame savings using an angle kit on a 12x14 internal frame is $200.

95% of my customers buy an angle kit and make their own frame.

Angle kit frames made of conduit are not quite as strong as regular steel frames. A maximum distance of 6' is recommended between rafters. More than 6' causes a sag in the roof and significantly reduces snow load carrying capacity.

The table below gives recommended rafter requirements for different lengths of tents. If you expect heavy snow loads add one additional rafter length to your joint angle kit purchase. The additional rafter significantly increases the strength of your internal frame.

 

HOW TO MEASURE A TENT TO ORDER AN ANGLE KIT



ANGLE KIT - CONDUIT CUT LIST FOR A NEW TENT


3 Rafter Kit Walltent and Canvas tents shop
POLES NOT INCLUDED

Angle Joint Diagram - shown as a three rafter angle kit

WILDERNESS, CUSTOM, MONTANA & KWIK KAMP FIXED STEEL ANGLE JOINT KITS

WILDERNESS and MONTANA angle kits can ship 1-2 DAYS after ordering

Most CUSTOM angle kits will ship 2-3 DAYS after ordering

KITS Max Tent Length

CUSTOM

KWIK KAMP

WILDERNESS PRICE ( 120 DEGREES)

SHIPPING
lower 48 states
3 Rafters - 9 Angles, 12lbs 12' $130

$135
$110
$20

4 Rafters - 12 Angles, 12lbs
18' $180
$175
$150
$25

5 Rafters - 15 Angles, 20lbs
24' $225
$215
$190
$30

6 Rafters - 18 Angles, 25lbs
30' $270
$260
$230
$35

Porch Kit 2 Rafters

6 each 3 way Angles, 8lbs

6' $95
$105
$85
$20

Porch Kit 3 Rafters

-6 each 3 way angles & 3 each 4 way angles

12' $130
$135
$110
$20
Angle only   $20
$20
$15

Minimum

S&H $10

Sleeves - 10" long   6 Sleeves

$21

8 Sleeves

$28

10 Sleeves

$35

MINIMUM

$15

 

MONTANA TENTS

FIXED STEEL ANGLE KITS ( in stock )

MT TENT SIZE RAFTERS PRICE SHIPPING RAFTERS PRICE SHIPPING
10 x 12 3 $120
$20 4 $160
$25
10 x 14 3 $120
$20 4 $160
$25
12 x 14 3 $120
$20 4 $160
$25
12 x 17 4 $160
$25 5 $200
$30
14 x 17 4 $160
$25 5 $200
$30
14 x 20 4 $160
$25 5 $200
$30
16 x 20 4 $160
$25 5 $200
$30
16 x 23 5 $200
$30 6 $240
$35
18 x 23 5 $200
$30 6 $240
$35
Porch/Cook shack for 10 x 12 to
14 x 20
2 $90
$15 3 $120
$20
Porch/Cook shack for 16 x 20 to
18 x 23
2 $90
$15 3 $120
$20
MT Angle Only
10 x 12 to
14 x 20
3 way $15
$10 minimum 4 way $15
$10 minimum
MT Angle Only
16 x 20 to
18 x 23
3 way $15
$10 minimum 4 way $15
$10 minimum
Sleeves 6" long SEE WILDERNESS ANGLES ABOVE          

T SUPPORT FOR RIDGE

  • Click How To Measure your existing tent for a frame or wall tent angle kit.
  • Click angle kit to view angle kit instructions to make your own canvas tent frame.
  • Tent frame angle kits can be ordered the same day Wilderness, Hunter ,Civil War, and Montana Canvas Tents are ordered. Wilderness, Montana Canvas Tents and our Civil War tents do not deviate in tent angle degree . Tent frame angle kits for Wilderness Tents will ship 1 business day after ordering.
  • Wilderness tent frame angle kit will have a 4-way angle at the front ridge, upon request, to allow you to extend a pipe for an awning. If 4-way on front ridge is not requested, a normal 3-way angle will be provided.
  • Scroll to bottom of page to see angle kit joints diagram.

WILDERNESS STEEL120º ANGLE JOINTS ARE IN STOCK AND CAN SHIP NEXT BUSINESS DAY. MOST 12', 14', 15', 16' & 18' WIDE TENTS REQUIRE THE 120º ANGLE JOINTS.

WILDERNESS ANGLES ARE GALVANIZED WITH SUPPORT BRACES FOR ADDITIONAL STRENGTH & DURABILITY.

CUSTOMERS FROM CANADA :

Please visit CANVASTENTSHOP.CA Canada web site designed to eliminate your brokerage fees and reduce shipping for US tents and tent stoves to Canada. Angle Kits, Canvas tents and tent stoves are in Canada ready for shipment.

RECOMMENDATION: After making your frame I recommend you wet down your new tent. When wetting your tent for shrinkage, and also when it rains/snows, insure that you have guy ropes/side ropes and wall stakes on your new wall tent to insure it only shrinks the normal 1-3% shrinkage and that it shrinks evenly. Otherwise it may shrink more than 3% and unevenly and may not fit your internal frame properly.

RECOMMENDATION: Purchase the Wilderness angle kit if you need 120 degree angles. All angles I sell do not fail during stress tests on a frame - the poles will always bend - angles never bend or break their weld. Wilderness angles have a support brace between joints for additional strength.

EXTENDED FLY OR AWNING: TO MAKE AN ANGLE KIT FRAME EXTENSION FOR A TENT WITHOUT EAVE OPENINGS - I recommend a 4way on the ridge end that goes through a ridge end opening and purchase 3 more 3 way angles. Your ridge extension conduit will fit into the 4 way on the ridge end and then connect to a 3 way at the end of ridge extension. Add rafters and legs using the 2 remaining 3 way angles. I recommend you drill holes in the ridge extension angles and conduit and install nuts and bolts to keep these angles in place as there is no tent enveloping the frame to keep the frame in place during windy conditions. ( If ridge extension is more than 6' you will need to buy 3 each 4 way to add another set of rafters)

SHIPPING PRICES are applicable to only lower 48 states. Canada and Alaska customers call or email for shipping quotes. Minimum shipping is $10 for angles or sleeves

ORDERING ANGLE KITS: To insure you order/receive the correct degree of angle, have some one help you pull the tent taut to insure the tent is measured accurately. Measure your tent width ( C measurement ) and slope ( B measurement ). The slope is the distance from top of the ridge to where roof meets the wall. In comments of check out form, type in width and slope measurements.

THERE ARE NO RETURNS ON CUSTOM ANGLE KITS. NO EXCEPTIONS. Measure your tent accurately to insure you receive the correct degree of angles for your tent. If the tent measurements you provide are not accurate - the custom angle kit will not fit your tent. Therefore, you will have to order and pay for another set of custom angles.

Walltent shop

3 Way's are on ends
4 Way's are in the middle



( 4 RAFTER ANGLE KIT - Wilderness - GALVANIZED), consists of 12 angles.






3 Rafter Angle Kit consists of 9 angles.

 

  • Click to view tent frame angle kit instruction sheet that explains how to make your tent frame.
  • BEFORE ORDERING ---- I NEED THE B & C TENT MEASUREMENT TO INSURE YOUR ANGLES FIT YOUR SPECIFIC TENT. PROVIDE B & C TENT MEASUREMENTS IN COMMENT SECTION OF SHOPPING CART. Click how to measure your current tent for an angle kit.
  • Kwik Kamp angle kit ship date is usually two to four weeks, especially during the peak selling season - August - October.
  • Wilderness angle kit ship date is next day if you need an angle kit for a Wilderness tent or Hunter tent and within one week of ordering for other types of tents.

MONTANA TENTS

FIXED STEEL ANGLE KITS ( in stock )

MT TENT SIZE RAFTERS PRICE SHIPPING RAFTERS PRICE SHIPPING
10 x 12 3 $120
$20 4 $160
$25
10 x 14 3 $120
$20 4 $160
$25
12 x 14 3 $120
$20 4 $160
$25
12 x 17 4 $160
$25 5 $200
$30
14 x 17 4 $160
$25 5 $200
$30
14 x 20 4 $160
$25 5 $200
$30
16 x 20 4 $160
$25 5 $200
$30
16 x 23 5 $200
$30 6 $240
$35
18 x 23 5 $200
$30 6 $240
$35
Porch/Cook shack for 10 x 12 to
14 x 20
2 $90
$15 3 $120
$20
Porch/Cook shack for 16 x 20 to
18 x 23
2 $90
$15 3 $120
$20
MT Angle Only
10 x 12 to
14 x 20
3 way $15
$10 minimum 4 way $15
$10 minimum
MT Angle Only
16 x 20 to
18 x 23
3 way $15
$10 minimum 4 way $15
$10 minimum
Sleeves 10" long SEE WILDERNESS ANGLES ABOVE          

ADJUSTABLE ANGLE KITS - Steel or Aluminum Models

Aluminum angles ship in 1 to 2 business days

  • Ship date is1 to 2 business days after order is received.
  • Adjustable aluminum angles come with two adjustments to fit Montana Outfitter or Blend tents.
    • If your tent has a different angle requirement you can drill a hole in the angle adjustment and insert locking pin.
    • Aluminum angles only have a 1" overlap with conduit on all horizontal frame poles and a 3" overlap with rafters. The 1" overlap on horizontal frame sections makes setting up the tent difficult. I recommend the steel adjustable angle.
  • Adjustable steel angles with wing nut.
    • Adjust angle and tighten wing nut to fit any tent.
    • Steel angles have a 3" overlap on horizontals and rafters.
  • Click to enlarge each adjustable angle shown below.
    • ADJUSTBLE ANGLE KITS Suggested Max Tent Length WT

      ALUMINUM ADJUSTABLE

      STEEL ADJUSTABLE
      SHIPPING
      lower 48 states
      3 Rafters - 9 Angles 12' 8 lbs
      $171
      $170
      $20
      4 Rafters - 12 Angles 18' 11 lbs
      $228
      $225
      $25
      5 Rafters - 15 Angles 24' 14 lbs
      $285
      $280
      $30
      6 Rafters - 18 Angles 30' 17 lbs
      $342
      $335
      $35
      Porch Kit
      2 Rafters - 6 Angles
      6' 6 lbs
      $114
      $115
      $20

      Porch Kit

      3 rafters - 9 angles

        1 lbs
      $171
      $170
      $20

      Angle Only

         
      $22
      $20
      Minimum
      S+H $10

      Sleeves 10" long

       

      SEE WILDERNESS ANGLES ABOVE  

       

       

       





    top
      Home | Wall Tents | Wall Tent Stoves | Angle Kits | Canvas Tent Frames | A-Frame
    Reenactor Tents | Accessories for Wall Tents | Tent Information Guide | Angle Kit Instructions
    How To Measure Tent Tent Set Up Instructions | Tent Stove Info Guide

    Wall Tent Shop
    208-882-1791, toll free: 800-234-1150, FAX: 208-882-4297
    support@walltentshop.com