WILDERNESS Tent Vinyl Corners
ONLY AVAILABLE FOR WILDERNESS TENTS.
Allows you to cut an X in the vinyl corners and connect the tent frame to a connecting frame to the front of your tent.
Four way angle is used at tent corners and ridge, instead of a 3 way angle, to connect to an extended fly frame or porch frame or cook shack frame.
Vinyl corners will not unravel like canvas if vinyl is cut.
Small X allows no wind to enter tent and no heat loss.
The best way to determine where to cut your X in the vinyl is to set tent up with normal 3 ways on the end of your tent. Draw a circle on the vinyl corner around the end of the 3 way angle.
Remove 3 way angles. Use a knife or razor blade to cut an X inside the circle.
When assembling your tent frame, if you have a front frame extension, always put the canvas over the tent end first that has the 4 way angles.
Four way angle is used at tent corners and ridge, instead of a 3 way angle, to connect to an extended fly frame or porch frame or cook shack frame.
Vinyl corners will not unravel like canvas if vinyl is cut.
Small X allows no wind to enter tent and no heat loss.
The best way to determine where to cut your X in the vinyl is to set tent up with normal 3 ways on the end of your tent. Draw a circle on the vinyl corner around the end of the 3 way angle.
Remove 3 way angles. Use a knife or razor blade to cut an X inside the circle.
When assembling your tent frame, if you have a front frame extension, always put the canvas over the tent end first that has the 4 way angles.